GN202G

RTK GNSS Module GN-02B

The GN-02B enhanced navigation and positioning G-Mouse product designed and produced by TOPGNSS is a single-frequency RTK enhanced chip and antenna integrated board product launched by TOPGNSS for the

  • Model:: GN-02B
  • Working level:: TTL Level
  • Refresh rate:: Default 1Hz
  • Operating voltage(V):: DC Voltage 3.7V, Typical: 3.7V
  • Operating current:: Capture 55mA/3.7V
  • size(mm):: 35*35*8.6mm
  • Weight(g):: 10g
  • Brand:: TOPGNSS
  • NMEA Message:: RTCM3.2,NMEA0183 RMC,GGA,GSA,GSV,GLL,VTG
  • Support customization::

The GN-02B enhanced navigation and positioning G-Mouse product designed and produced by TOPGNSS is a single-frequency RTK enhanced chip and antenna integrated board product launched by TOPGNSS for the high-precision application market. It adopts GNSS chip, supports multi-system joint positioning, integrates unique RTK algorithm, and exerts the super performance of single-frequency RTK positioning.
GN-02B supports BDS B1, GPSL1, Beisan, QZSS and other signals. At the same time, the on-board dual-feed point self-developed high-precision single-frequency positioning antenna is used to effectively suppress multipath signals. The antenna trace is the shortest, the anti-interference effect is good, and the positioning effect is improved; the GN-02B has low power consumption and consistent positioning accuracy ( It has significant advantages in performance such as sub-meter level, half the sky, shaded environment) and sub-meter level positioning accuracy convergence time during parking (convergence time during parking<5s).

Features:
• Unique RTK algorithm, stable centimeter-level positioning accuracy
• Support BDS/GPS/QZSS multi-system joint positioning
• Smart Suppress anti-jamming technology
• Small package size, easy to integrate
Application field
The products are mainly used in high-precision location services, including high-precision car navigation, logistics monitoring, shared travel, and unmanned vehicles.

Set 5HZ output command: $cfgprt,,115200,,;cfgsave,

Set the baud rate and save:

Set the baud rate to 38400 and save the command: $cfgprt,,38400,,;cfgsave,

Set the baud rate to 9600 and save the command: $cfgprt,,9600,,;cfgsave,

Set the baud rate to 4800 and save the command: $cfgprt,,4800,,;cfgsave,



首页
产品
联系